Cooling Tower Control Panel - Standard Panel - 48 Max Amps

$2,320.00
Ships in 2-3 weeks - Call to expedite
SKU
874Z-2010

Cooling Tower Control Panel
48 Max Amps
Standard Panel
Standard Options

More Cooling Tower Control Panels Available

Cooling Tower Control Panel Specifications

  • Solid-State Control: Pre-set 45° F ON/OFF temperature control with 5° F switching differential and built-in low water cutoff. Circuit board LED's provide visual indication of heater-on and liquid level status.

  • Ambient Temperature Range: -40° F to 150° F

  • Fail Safe: Output relay is de-energized if the input sensor is either open or short-circuited. This prevents heater burnout problems.

  • NEMA 4X enclosure with pre-mounted electrical hubs for conduit connections.

  • Single probe to sense both water temperature and water level. Sensor probe supplied with 12-foot outdoor rated cord pre-connected to control panel. Probe also supplied with PVC hub connector for attachments through cooling tower basin wall.

  • Nameplate showing maximum KW and amp ratings at system volts/phase.

  • System Wiring Diagram.

  • Installation and Operating Instructions.

  • Rated for maximum of 40 amps or 50 amps with disconnect switch when specified.

  • Suitable for multiple heaters per basin (maximum of 2 on 40 amp panel).

  • Disconnect switch with door interlock and operator handle, which can be padlocked in the "OFF" position.

  • Dimensions: 8" x 10" x 6" for 40 amp size, 10" x 12" x 7" for 50 amp size, 14" x 16" x 8" for two circuits
  • Control panels rated greater than 50 amps are supplied with two circuits and offered either with built-in fusing or a circuit breaker for each circuit.

© 2020 Heating Elements Plus - A Division of Protherm Industries, Inc. - All Rights Reserved. ProTherm Industries, Inc. | 201 Pryor Creek Road N. | Suite 5 | Lebanon TN 37090-1255