Non-Hazardous Harsh Environment Constant-Wattage Heating Cable

$7.88
In stock
SKU
CWJ12

Requires a temperature controller!
Harsh environment, chemical & wet locations.
NOT APPROVED For Hazardous Locations.
Tinned copper braid with an FEP overjacket for harsh environments.
4, 8 or 12 watts per foot.
120 through 480 volt options.

See Full Description Below

American made heat trace cable
Click here for constant wattage heating cable installation kits.

Sold by the foot - add quantity below.

Tinned copper braid with FEP overjacket for harsh environments.
Circuit load: 0.033 amps per foot
Maximum circuit length: 350 foot
Maintains temp to 320°F
Jacket withstands temp to 392°F

How constant wattage heat trace cable works

Our CWJ12 general purpose, constant wattage heating cable is a proven, reliable solution for industrial process temperature maintenance and freeze protection. CWJ12 features a parallel heating core that produces uniform thermal output over its entire length. Using a single power point, you can easily configure and install a heat tracing system as short as several feet or as long as 780 feet right in the field.

  • Uniform Thermal Output, Low Energy Cost
  • No Inrush at Any Ambient
  • Maximum Exposure Temperature, Power Off, 392°F (200°C)
  • Steam Cleanable on Process Equipment Up to 190 PSIG (Power Off)
  • Approximate Size 1/4"W x 1/8"H
  • Minimum Bend Radius 1-1/4"
  • For Use on Metallic Pipes


WARNING — A ground fault protection device is required by NEC to minimize the danger of fire if the heating cable is damaged or improperly installed. A minimum trip level of 30mA is recommended to minimize nuisance tripping.

Model

Output

Voltage

Circuit Load

Max.Circuit Length

CWJ124120

4 W/Ft.

120 volt

0.033 Amps/Ft.

350 Ft.

CWJ128120

8 W/Ft.

120 volt

0.067 Amps/Ft.

240 Ft.

CWJ1212120

12 W/Ft.

120 volt

0.100 Amps/Ft.

200 Ft.

CWJ124240

4 W/Ft.

240 volt

0.017 Amps/Ft.

700 Ft.

CWJ128240

8 W/Ft.

240 volt

0.033 Amps/Ft.

480 Ft.

CWJ1212240

12 W/Ft.

240 volt

0.050 Amps/Ft.

400 Ft.

CWJ1212480

12 W/Ft.

480 volt

0.025 Amps/Ft.

780 Ft.

© 2020 Heating Elements Plus - A Division of Protherm Industries, Inc. - All Rights Reserved. ProTherm Industries, Inc. | 201 Pryor Creek Road N. | Suite 5 | Lebanon TN 37090-1255