$72.46
1 1/2" Insertion Cartridge Heater With 3/8" Brass NPT
1/2" diameter
200 watts
120 or 240 volt
14" leads (26" and 38" optional)
1.87" overall length
Minimum Quantity Required!
Please check Qty box below.
| Weight | 0.25 lbs |
|---|
3" Insertion Cartridge Heater 500w 120/240v SS Right Angle Lead
$109.68
3.5" Insertion Cartridge Heater 125w 120v Brass NPT
$89.88
Mercury Free 20,000psi 6" stem + 18" flex
$1,012.00
4" Insertion Cartridge Heater 150w 120v SS Rt. Angle Conduit
$113.42
9.25"L x 3/4"-16UNC Rupture Disk 7500psi Recessed
$385.00
3.7"L x 1/2-20UNF Extruder Rupture Disk 10,000psi
$132.00
36 Zone MFL 15 Amp Mainframe
$3,290.00
3.7"L x 1/2-20UNF Extruder Rupture Disk 2500psi
$176.00
1.5"D x 4"W Nozzle Band Heater 120/240V 550W High Temp Leads
$40.51
9.25"L x 3/4"-16UNC Rupture Disk 5000psi Standard
$385.00
Self-Regulating Heat Cable is commonly used for freeze protection of water and drain lines, and for protecting residential and commercial roofs and gutters from ice dams. The temperature rating is for the heat cable’s outer jacket and has nothing to do with the actual temperature of the cable. For most residential applications, you will choose the low temperature cable, as most water lines in the home never exceed 150 degrees.
