$81.17
2" Insertion Cartridge Heater With 3/8" Brass NPT
1/2" diameter
100 watts
120 volt
14" leads (26" and 38" optional)
2.37" overall length
Minimum Quantity Required!
Please check Qty box below.
| Weight | 0.25 lbs |
|---|
6.7"L x 1/2-20UNF Extruder Rupture Disk 3500psi
$154.00
3.7"L x 1/2-20UNF Extruder Rupture Disk 11,000psi
$132.00
3" Insertion Cartridge Heater 250w 120/240v SS Flange
$76.52
7"L x 5/8"-11UNC Extruder Rupture Disk 10,000psi
$286.00
6.7"L x 1/2-20UNF Extruder Rupture Disk 1500psi
$198.00
9.25"L x 3/4"-16UNC Rupture Disk 5000psi Recessed
$385.00
3.7"L x 1/2-20UNF Extruder Rupture Disk 12,000psi
$132.00
9.25"L x 3/4"-16UNC Rupture Disk 5000psi Standard
$385.00
3.7"L x 1/2-20UNF Extruder Rupture Disk 10,500psi
$132.00
5" Insertion Cartridge Heater 150w 120/240v
$69.08
Self-Regulating Heat Cable is commonly used for freeze protection of water and drain lines, and for protecting residential and commercial roofs and gutters from ice dams. The temperature rating is for the heat cable’s outer jacket and has nothing to do with the actual temperature of the cable. For most residential applications, you will choose the low temperature cable, as most water lines in the home never exceed 150 degrees.
