Pushrod - Pressure + Temperature

The diaphragm transmits pressure through the PUSHROD. The electronic temperature compensation circuit ensures high temperature stable pressure readings. Four active arm wheatstone bridge strain gage ensures high accuracy. The rigid stem makes installation fast and easy.

18” flexible capillary with stainless armour coating. This provides further thermal isolation and installation flexibility.

The transition from rigid stem to flexible capillary must be maintained below 247°F (120°C).

Temperature sensor mounted behind diaphragm. This provides temperature and pressure measurement from a single hole. The temperature sensor is field replaceable without removing pressure sensor.

Features:

  • NO LIQUID FILL
  • Standard 3.33mV/V
  • 6pin Bayonet Connector
  • 6” Stem
  • 1% combined error
  • 80% Output Calibration
  • Interchangeable with all Competitor’s models
  • 1000°F (540°C) Rating
  • Ranges from 5000 to 10,000 psi
  • Standard Inconel Diaphragm
  • Thermocouple J
  • Field Replaceable

Options:

  • Output option - 2.5mV/V, 4-20mA, 0-5VDC & 0-10VDC
  • Connector option - 8 pin - 6 pin-CANNON
  • 12" stem
  • 30" Flex hose (MR200)
  • Optional diaphragms - Hastelloy, Titanium Nitride, Inconel Tip & Diamond Particulate
  • Thread Options
  • Temperature Sensors
  • Thermocouple K
  • Pt100 RTD sensor

Call 615-834-4044 to order transducers with options not listed below.

© 2020 Heating Elements Plus - A Division of Protherm Industries, Inc. - All Rights Reserved. ProTherm Industries, Inc. | 201 Pryor Creek Road N. | Suite 5 | Lebanon TN 37090-1255