SMO3 Forced Air Oven, 3.0 Cu.Ft.

$4,292.70
Ships in 2-3 weeks
SKU
SMO3

The SMO3 has triple wall construction and easy-to-read microprocessor controls. Users can adjust the air exhaust from the chamber without being near the heat source. Even at operating temperatures of 225°C, the outer skin of this unit meets all CE requirements, so workspaces remain cool.

Price Includes Freight & Pallet.
Can take 4-6 weeks for delivery.

The SMO3 has triple wall construction and easy-to-read microprocessor controls. Users can adjust the air exhaust from the chamber without being near the heat source. Even at operating temperatures of 225°C, the outer skin of this unit meets all CE requirements, so workspaces remain cool.

The 99 hr 59 min digital timer has an independent control, so its use is optional. Once the timer expires, the heating elements turn off while the blower continues running to cool the samples inside the oven.

Whatever the application, these forced air ovens deliver precise uniformity, air distribution and the peace of mind expected from the SHEL LAB brand.

Note: Replaces models CE3F and 1350FM

  • Microprocessor Controls
  • Horizontal Air Flow
  • Cool Touch Damper
  • Digital Timer to 99hr and 59 min
  • CE Approval
  • 24 Month Limited Warranty
MODEL SMO3
Shelving 2 Supplied (8 Maximum)
Heat-up (min) 36 minutes to 150°C
Temperature Recovery Time 5 minutes at 150°C
Temperature Uniformity +/-2.0°C at 150°C
Temperature Range 15°C above ambient to 225°C
Exterior Dimensions WxDxH in. (cm) 26.0 x 27.0 x 35.5 (66.1 x 68.6 x 90.2)
Interior Dimensions WxDxH in. (cm) 16.5 x 19.2 x 16.5 (41.9 x 48.9 x 41.9)
Capacity 3.0 Cu.Ft. (85 L)
Nominal Voltage 50/60HZ (V) 115/230
Maximum Energy Consumption (W) 1150/1955
Factory Installed Reversible Door Optional

All specifications are determined by using average values on standard equipment at an ambient temperature of 25°C (77°F) and line voltages within +/-10% of unit type (115V/230V). Temperature specifications follow DIN 12880 methodology. We reserve the right to change specifications at any time.

© 2020 Heating Elements Plus - A Division of Protherm Industries, Inc. - All Rights Reserved. ProTherm Industries, Inc. | 201 Pryor Creek Road N. | Suite 5 | Lebanon TN 37090-1255