UL Power Connection With Ground Fault Kit For Heat Trace Cable

This universal kit provides ground fault interrupting input power connection/termination for low temp, self-regulating heating cable only. Each kit can complete one ground fault protected power input connection/termination. For use in ordinary locations and with roof & gutter snow melting and de-icing applications.

Kit Contents:

• 1 – ground fault device with 120 VAC 3 prong plug (NEMA 5 – 15P)
• 1 – black cloth tape
• 2 – mastic strips
• 2 – clamp ties
• 2 – crimp-on insulated terminals
• 1 – crimp-on non-insulated barrel
• 1 – heat-shrink tube – 0.75 in x 8 in (19 mm x 200 mm)
• 1 – heat-shrink tube – 0.75 in x 8 in (19 mm x 130 mm)
• 1 – heat-shrink tube – 0.13 in x 1 in (3 mm x 25 mm)
• 1 – heat-shrink tube – 0.50 in x 1 in (13 mm x 25 mm)
• 1 – heat-shrink tube – 0.31 in x 1.5 in (8 mm x 38 mm)
• 2 – heat trace warning labels
• 2 – de-icing snow melt caution labels

Approvals: UL, Approvals only valid when used with SLCBL-BP, -BF Series heating cable and installation accessories, and installed in accordance with all applicable instructions, codes, and regulations.