18 w/ft 277v High Temperature Constant-Wattage Heating Cable
$7.59
In stock
SKU
KKCAB18277
- Buy 1000 for $6.90 each and save 9%
- Buy 5000 for $6.56 each and save 14%
18 watts/ft 277 volt high temperature constant wattage heat trace cable.
18 watts/ft 277 volt high temperature constant wattage heat trace cable.
100 Foot Minimum Order
Please call 615-834-4044 for orders under 100 feet,
as there is an additional cutting fee.
Suggested items for your installation:
Connection KitsAccessories
High Temp Tape
Line Sensing Thermostat
Control Panels
Temperatures up to 500°F (260°C)
Power remains constant regardless of temperature
Can be cut-to-length at job site
Ideal for a wide range of general purpose applications:
- Viscosity control
- Asphalt lines
- Heavy oil lines
- Nuclear environments
- Locations where halogens are not permitted
- Process lines subject to high pressure steam blow down
Specifications:
- Maximum exposure temperature is 500°F (260°C)
- Moisture, chemical, flame, and radiation resistant
- 12AWG bus wires
- Dimensions 0.2" x 0.3" (5 x 8mm)
- 30 lb. (14kg) per 500-foot (152m) spool
Maximum Circuit Length in ft (m)
Cable Type | 120VAC | 208VAC | 240VAC | 277VAC | 480VAC |
4 watts/ft (13 watts/m) |
480 (146) |
830 (253) |
960 (293) |
1110 (338) |
1920 (585) |
8 watts/ft (26 watts/m) |
240 (73) |
415 (127) |
480 (146) |
555 (169) |
960 (293) |
12 watts/ft (39 watts/m) |
160 (49) |
277 (85) |
320 (98) |
370 (113) |
640 (195) |
18 watts/ft (59 watts/m) |
105 (32) |
185 (56) |
215 (65) |
245 (75) |
425 (130) |
Circuit Module Length in ft (m)
Cable | 120VAC | 208VAC | 240VAC | 277VAC | 480VAC |
4 watts / ft 12AWG (13 watts / m): |
4.0 (1.2) |
4.0 (1.2) |
4.0 (1.2) |
4.0 (1.2) |
8.0 (2.4) |
8 watts / ft 12AWG (26 watts / m): |
2.0 (0.6) |
4.0 (1.2) |
4.0 (1.2) |
4.0 (1.2) |
6.0 (1.8) |
12 watts / ft 12AWG (39 watts / m): |
2.0 (0.6) |
4.0 (1.2) |
4.0 (1.2) |
4.0 (1.2) |
7.0 (2.1) |
18 watts / ft 12AWG (59 watts / m): |
1.75 (0.5) |
3.0 (0.9) |
3.5 (1.1) |
4.0 (1.2) |
5.5 (1.7) |
Note: when ordering, please allow a minimum of 1 module length extra for terminations.