Industrial & Process Heating Elements

5 Watt 240 Volt Hazardous Location Heat Trace Cable

More Views

5 Watt 240 Volt Hazardous Location Heat Trace Cable

Availability: In stock

Part #: HSRL5-2CT

5 Watt per foot
240 Volt
Self regulating
16 AWG bus wire
Process Temperature Maintenance to 150°F
Maximum Continuous Exposure Temperature, Power Off, 185°F
Division 1 Hazardous Locations
Approximate Size 3/8"W x 1/8"H
For Use on Metal and Plastic Pipes
FM and CSA approved
5 watt rated T5 - Less than 212F



Chromalox HSRL self-regulating heating cable provides safe, reliable heat tracing for freeze protection of pipes, valves, tanks and similar applications. Constructed of industrial grade 16 AWG buss wire with a tinned copper braid and fluoropolymer overjacket, HSRL ensures operating integrity in Div. 1 hazardous environments. HSRL heating cable has a maximum maintenance temperature rating of 150°F (65°C) and a maximum exposure temperature of 185°F (85°C)

Note: Due to the nature of Division 1 hazardous location applications consultation with a factory representative is required.

WARNING — A ground fault protection device is required by NEC to minimize the danger of fire if the heating cable is damaged or improperly installed. A minimum trip level of 30 mA is recommended to minimize nuisance tripping.

Temperature Classes

3 watt rated T6 - Less than 185F
5 watt rated T5 - Less than 212F
8 watt rated T5 - Less than 212F
10 watt rated T4 - Less than 275F