Standard Duty Silicone Rubber Poly Drum/Pail Heater

$164.00
In stock
SKU
DPCS

Drum and Pail Heaters are designed to provide practical, efficient means of freeze protection, viscosity control, and maintenance of materials at elevated temperatures. The DPCS Drum/Pail heaters are designed with two extra-thick layers of fiberglass reinforced silicone rubber for use on poly/plastic drums.

Heater Width: 4 in (102 mm)
Voltage Options: 120 VAC or 240 VAC
Exposure Temperature: -60°F to 450°F (-51°C to 232°C)
Dielectric Strength: Over 2000 Volts
Attachment Type: Expandable spring closure — expands up to 3 in (76 mm)
Silicone Rubber Density: Standard duty: 46.0 oz/yd² (1560 g/m²)

Power Cord: 6 ft (1.8 m) long with choice of plug

  • Standard 120 VAC: 3-prong grounded plug (NEMA 5-15P)
  • CSA/cURus approved 120 & 240 VAC: bare wire leads

IP Rating: IP54

CE approved for models with bare wire leads

CE approved for models with bare wire leads

Part numbers ending with an "A":

  • CSA approved 
  • cURus approved if used under 392°F (200°C)

Standard Duty Silicone Rubber Drum/Pail Heaters

Part No. 120 VAC  Part No. 240 VAC  Drum Size Gallons Drum Diameter  Heater Length in (mm)  Drum Type Adjustable Thermostat Range  Watts 
DPCS10 DPCS20 3.5 to 7 11.1 to 12.1 35.0 (889) Poly Up to 160°F 150
DPCS11 DPCS21 15 to 16 14.0 to 15.0 44.0 (1118) Poly Up to 160°F 208
DPCS13 DPCS23 30 18.6 to 19.6 58.5 (1486) Poly Up to 160°F 250
DPCS15 DPCS25 55 22.3 to 23.2 70.0 (1778) Poly Up to 160°F 300

 

Standard Duty - CSA and cURus Approved Designs

Part No. 120 VAC  Part No. 240 VAC  Drum Size Gallons Drum Diameter Heater Length in (mm)  Drum Type Adjustable Thermostat Range  Watts 
DPCS10A DPCS20A 3.5 to 7 11.1 to 12.1 35.0 (889) Poly Up to 160°F 150
DPCS11A DPCS21A 15 to 16 14.0 to 15.0 44.0 (1118) Poly Up to 160°F 208
DPCS13A DPCS23A 30 18.6 to 19.6 58.5 (1486) Poly Up to 160°F 250
DPCS15A DPCS25A 55 22.3 to 23.2 70.0 (1778) Poly Up to 160°F 300
© 2020 Heating Elements Plus - A Division of Protherm Industries, Inc. - All Rights Reserved. ProTherm Industries, Inc. | 201 Pryor Creek Road N. | Suite 5 | Lebanon TN 37090-1255