SVAC1E Economy Vacuum Oven, 0.6 Cu.Ft.

$3,227.00
Ships in 2-3 weeks
SKU
SVAC1E

The SVAC1E is durably constructed with seamless welds and strong bracing. All of our vacuum ovens are built with a stainless steel chamber for exceptional durability. Our unique cross-flow ventilation forces inert gas to fill the entire chamber.

Price Includes Freight & Pallet.
Can take 4-6 weeks for delivery.

The SVAC1E is durably constructed with seamless welds and strong bracing. All of our vacuum ovens are built with a stainless steel chamber for exceptional durability. Our unique cross-flow ventilation forces inert gas to fill the entire chamber.

The doors on these units have positive latch handles with spring-loaded glass to facilitate a good vacuum seal without hinge binds that shorten the gasket life. A selection of gaskets (for specific applications) and a small bench top footprint increase the versatility of these ovens.

Please note that this vacuum oven does not include a pump or related accessories.

Note: Replaces model 1407

  • Cross Ventilation Air Flow Design
  • Achieve Impressive Vacuum Levels
  • Size 0.6 Cu.Ft.
  • Built-in Overtemperature Protection
  • 24 Month Limited Warranty
MODEL SVAC1E
Shelving 2 Supplied
Heat-up (min) 90 minutes at 150°C
Temperature Uniformity +/-3.0 at 60°C, +/-9.0 at 120°C, +/-13.0 at 200°C
Temperature Range Ambient +/- 15°C to 210°C
Exterior Dimensions WxDxH in. (cm) 15.5 x 19 x 22.5 (39.4 x 48.3 x 57.2)
Interior Dimensions WxDxH in. (cm) 9 x 12 x 9 (22.8 x 30.4 x 22.8)
Capacity 0.6 Cu.Ft. (17 L)
Nominal Voltage 50/60HZ (V) 115/230
Maximum Energy Consumption (W) 600/575
Vacuum Range inch Hg (-3.0 to -29.9), kPa (-10 to -101), mbar (-101 to -1010)
Display Vacuum Range (Analog Dial Gauge) inch Hg (0 to 30), cm Hg (0 to 76)

All specifications are determined by using average values on standard equipment at an ambient temperature of 25°C (77°F) and line voltages within +/-10% of unit type (115V/230V). Temperature specifications follow DIN 12880 methodology. We reserve the right to change specifications at any time.

© 2020 Heating Elements Plus - A Division of Protherm Industries, Inc. - All Rights Reserved. ProTherm Industries, Inc. | 201 Pryor Creek Road N. | Suite 5 | Lebanon TN 37090-1255