The SVAC9-2 Watlow temperature controller, programmable and microprocessor-based, offers multiple ramp and soak capabilities, including storing and running up to 40 temperature profiles. The controls are easily adjustable and the control panel is user friendly. A digital vacuum gauge shows chamber vacuum level in measurements of Torr and m/Torr. The display range is 760 Torr down to 0 mTorr (Maximum permitted end vacuum is 10 mTorr. Leak rate is 10 mTorr per hour). A secondary independent high limit controller provides overtemperature safety protection.
The oven chamber is wrapped in high temperature insulation which aids overall performance and promotes energy efficiency. Powder coat construction, true vacuum valves and cross-flow ventilation through the oven chamber enhance total performance. The vacuum oven is secured to a ruggedly constructed mobile stand to create a vacuum pump at the base. Although the oven is not supplied with a vacuum pump, all vacuum plumbing and KF25 connections are provided.
Please note that this vacuum oven does not include a pump or related accessories.
Note: Replaces model VPX9-2
- Ramp and Soak Controller
- Stainless Steel Interior
- KF25 Fitting Included
- Built in Vacuum Pump Mount
- 24 Month Limited Warranty
MODEL SVAC9-2 Shelving 3 Heat-up (min) 90 min at 150°C Electrical Specifications Volts: 220V Hertz: Watts: 3840W Amps: 16A Temperature Uniformity +/- 7.0°C at 150°C Temperature Range 5°C above ambient to 220°C Exterior Dimensions WxDxH in. (cm) 36 x 46.5 x 62 (91.5 x 118.2 x 157.5) Interior Dimensions WxDxH in. (cm) 28 x 24 x 24 (71.1 x 60.9 x 60.9) Capacity 9.3 Cu.Ft. (264 L)
All specifications are determined by using average values on standard equipment at an ambient temperature of 25°C (77°F) and line voltages within +/-10% of unit type (115V/230V). Temperature specifications follow DIN 12880 methodology. We reserve the right to change specifications at any time.